No products
Prices are tax included
Product successfully added to your shopping cart
Cars
Planes
Helicopters
Multirotors
Electronics
Packs & connectors
Motors
Accessories
Consumables
Slow Cure 30min Epoxy 128g (4 1/2 oz)
This product is not in stock. Addition to the backorder possible.
Ordered from supplier, delivery time unknown.
More info
Slow-Cure 30 min. forms the strongest bonds, is waterproof and more heat resistant than any of the other epoxies in the range. Of course when using it for bonding the only problem is the length of time needed to cure; for handling there is a wait of 8 hours and full strength isn’t attained until the 24 hour mark is reached. To very well take advantage of it’s strength use it to fillet already formed joints. It can be mixed with microbaloons to form a putty-like consistency which is ideal for the task, although using this technique does slow down the curing time, by around 25%.
Application chart
- Balsa wood (**)
- Soft wood (**)
- Hard wood (**)
- Glass and metal (***)
- Fiberglass (**)
- Hard plastic (**)
- White foam (***)
- Laminating (**)
- Reinforcing (***)
- Water-resistant (***)
USAGE
SLOW-CURE™ 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
SLOW-CURE™ has the highest strength of our epoxies and should be applied in temperatures above 70°F. SLOW-CURE™ maintains it’s strength in both the lowest and highest temperature ranges of our line of epoxies.
SLOW-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. SLOW-CURE™ works best for forming reinforcing fillets on joints and can be mixed with microballons or other fillers to form putty-like consistency. SLOW-CURE™ is waterproof and forms superior bonds if you’re willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.
WARNING:
- May cause skin irritation.
- Contains: Epoxy Resins and Polyamine Resins.
- For skin contact remove with soap and water.
- Do not take internalty. Use with adéquate ventilation.
- KEEP OUÏ OF REACH OF CHILDREN.
- This product may contain Chemicals known to the State of California to cause cancer.
- For more information visit www.P65Warnings.ca.gov.
- Manufacturer : BSI
