This site uses cookies to provide you a better browsing experience and to process your order.
Quick-cure 15 min is the choice when working with large areas or more complex joints. It is the most flexible of all of the epoxies and is more moisture resistant than Quick-Cure 5 min. It’s properties make it the optimum choice for boding components to fiberglass surfaces, components can be handled after 45 minutes and full strength is reached after two hours.
Application chart
USAGE
MID-CURE™ 15 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
MID-CURE™ should be applied in temperatures above 65˚F. It can be used in most applications when you need more working time than QUIK-CURE™ provides. MID-CURE™ can be worked for about 10 minutes, with adhesion beginning after about 15 minutes.
MID-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. MID-CURE™ is our most flexible epoxy. This gives it superior bonding qualities in applications such as hardwood to fiberglass. MID-CURE’S™ lack of brittleness allows it to form lasting bonds in areas subject to high vibration or stress. MID-CURE™ is a water-resistant substitute for QUIK-CURE™. Full cure in 2-3 hours.
WARNING:
Beez2B is proud to present: APC, Atomic r/c racing products, Beez2B, BSD Racing, BSI Bob Smith Industries Incorporated, Burning Fuel, Cross-RC, Devention, Dry Fluid Extreme, eTurbine, FMS, Freewing, H Factor, iMAX Sky RC, killerbody, MRT, Muc-Off, Nosram, Precision tools by ProEdge, Radiolink, Robitronic, Roc Hobby, RW Racing, Sky-Hero, Spec.R, The Rally Legends, Tech One, T-Motor, Walkera, Xtreme Production, 4Wheels, 4Wings and many other brands