No products
Prices are tax included
Product successfully added to your shopping cart
Cars
Planes
Helicopters
Multirotors
Electronics
Packs & connectors
Motors
Accessories
Consumables
View larger
IC-2000 Black Rubber Toughened Cyanoacrylate 14g (1/2)
This product is not in stock. Addition to the backorder possible.
Ordered from supplier, delivery time unknown.
More info
With a formula that toughens the Cyanoacrylate with the addition of rubber IC-2000 creates bonds on non-porous surfaces that are highly resistant to shock and vibration. This flexible bonding capability can also be used to great effect when working with metals, fiberglass, rubber and carbon fibre. Curing time is 20 to 40 seconds, which can be accelerated with the addition of Insta-Set.
When cured IC-2000 remains pliable enough to be carved with a hobby knife. It’s flexibility and high bond strength makes it ideal for gluing rubber tires onto wheels.
Application chart
- Balsa wood (**)
- Soft wood (**)
- Hard wood (**)
- Glass and metal (**)
- Fiberglass (***)
- Ceramics (**)
- Hard plastics (***)
- Rubber (***)
- Laminating (**)
- Water resistant (**)
- Filling (**)
USAGE
Screw on top and cap unit to puncture the seal on the tube Remove cap and apply IC-2000™ CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250º F. Top and tip can be soaked in acetone for cleaning.
GENERAL SAFETY INFORMATIONS ABOUT CA :
While holding the bottle upright, loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off end of tip. Hold parts lightly together and apply glue on seam for instant bonding. Full strength is reached in 1 hour.
- WEAR EYE PROTECTION
- STORE IN A COOL, DRY PLACE
- WARNING: EYE, RESPIRATORY, AND SKIN IRRITANT.
- BONDS SKIN INSTANTLY.
- Contains cyanoacrylate ester.
- Do not breathe fumes. Use with adequate ventilation If contact with eyes occurs, flush with water only and GET MEDICAL ATTENTION.
- If skin bonding occurs, peel (do not pull skin apart); soak in UN-CURE'™ if necessary.
- KEEP OUT OF REACH OF CHILDREN
- Manufacturer : BSI
What's so great about Cyano adhesives?
