No products
Prices are tax included
Product successfully added to your shopping cart
Cars
Planes
Helicopters
Multirotors
Electronics
Packs & connectors
Motors
Accessories
Consumables
View larger
Maxi Cure Cyanoacrylate Extra Thick 14g (1/2 oz)
More info
The high viscosity of the Maxi-Cure give the best performance with most plastics it also performs well with fiberglass, metal, hardwood and rubber. Used in conjunction with Insta-Set it can be used to great effect for modifying or filling voids. When cured it can be sculptured with a knife or blade, can be sanded and fine feathered producing a finish that is indistinguishable from plastic.
Application chart :
- Balsa Wood (**)
- Soft wood (***)
- Hard wood (***)
- Glass and metal (***)
- Fiberglass (***)
- Ceramics (***)
- Hard plastic (***)
- Rubber (***)
- Water resistant (**)
- Filling (**)
USAGE
Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure™ CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.
GENERAL SAFETY INFORMATIONS ABOUT CA :
While holding the bottle upright, loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off end of tip. Hold parts lightly together and apply glue on seam for instant bonding. Full strength is reached in 1 hour.
- WEAR EYE PROTECTION
- STORE IN A COOL, DRY PLACE
- WARNING: EYE, RESPIRATORY, AND SKIN IRRITANT.
- BONDS SKIN INSTANTLY.
- Contains cyanoacrylate ester.
- Do not breathe fumes. Use with adequate ventilation If contact with eyes occurs, flush with water only and GET MEDICAL ATTENTION.
- If skin bonding occurs, peel (do not pull skin apart); soak in UN-CURE'™ if necessary.
- KEEP OUT OF REACH OF CHILDREN
- Manufacturer : BSI
What's so great about Cyano adhesives?
