No products
Prices are tax included
Product successfully added to your shopping cart
Cars
Planes
Helicopters
Multirotors
Electronics
Packs & connectors
Motors
Accessories
Consumables
View larger
Insta-Cure Cyanoacrylate Super Thin 14g (1/2 oz)
More info
Water thin viscosity means that Insta-Cure will wick deep into a joint by capillary action and set within seconds. Surfaces to be bonded should be accurately fitting and should be kept in tight contact while curing takes place.
The CA can be applied around the edges of the join and will penetrate by capillary action. Because of its capacity to penetrate finely porous surfaces Insta-Cure is ideal for bonding balsa wood as it penetrates into the wood producing a join that is more substantial than just purely a surface bond.
Application chart :
- Balsa Wood (***)
- Soft wood (**)
- Fiberglass (**)
- Ceramics (***)
- Hard plastic (**)
- CA hinges (**)
- Water resistant (**)
USAGE
Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure™ CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure™ along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.
GENERAL SAFETY INFORMATIONS ABOUT CA :
While holding the bottle upright, loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off end of tip. Hold parts lightly together and apply glue on seam for instant bonding. Full strength is reached in 1 hour.
- WEAR EYE PROTECTION
- STORE IN A COOL, DRY PLACE
- WARNING: EYE, RESPIRATORY, AND SKIN IRRITANT.
- BONDS SKIN INSTANTLY.
- Contains cyanoacrylate ester.
- Do not breathe fumes. Use with adequate ventilation If contact with eyes occurs, flush with water only and GET MEDICAL ATTENTION.
- If skin bonding occurs, peel (do not pull skin apart); soak in UN-CURE'™ if necessary.
- KEEP OUT OF REACH OF CHILDREN
- Manufacturer : BSI
What's so great about Cyano adhesives?
