This site uses cookies to provide you a better browsing experience and to process your order.
Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto R/C car wheels. It is available in our 3/4 oz Pocket CA bottle and comes with one of our new #304 Extender Tips for the Pocket CA pin-in-cap top. ULTRA-CURE™ can be used in many other applications that require a slightly thicker thin CA and will bond virtually everything. It is not foam-safe, however.
USAGE
Unscrew top from nozzle. For finer applications, use the extender tip. Carefully lift the sidewall of the tire after it is mounted to the wheel to expose the area to be bonded. Apply a drop of Ultra-Cure™CA Tire Glue into the gap, then slowly return the tire to its seated position. Continue this process around the circumference of the tire. Repeat these steps for the other side. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life when not in use. Ultra-Cure™is also superior for bonding most other materials. Soak extender tip in acetone for cleaning.
GENERAL SAFETY INFORMATIONS ABOUT CA :
While holding the bottle upright, loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off end of tip. Hold parts lightly together and apply glue on seam for instant bonding. Full strength is reached in 1 hour.
Beez2B is proud to present: APC, Atomic r/c racing products, Beez2B, BSD Racing, BSI Bob Smith Industries Incorporated, Burning Fuel, Cross-RC, Devention, Dry Fluid Extreme, eTurbine, FMS, Freewing, H Factor, iMAX Sky RC, killerbody, MRT, Muc-Off, Nosram, Precision tools by ProEdge, Radiolink, Robitronic, Roc Hobby, RW Racing, Sky-Hero, Spec.R, The Rally Legends, Tech One, T-Motor, Walkera, Xtreme Production, 4Wheels, 4Wings and many other brands