No products
Prices are tax included
Product successfully added to your shopping cart
Cars
Planes
Helicopters
Multirotors
Electronics
Packs & connectors
Motors
Accessories
Consumables
View larger
Insta-Set Activator Refill 237ml (8fl/ oz)
More info
The property of surfaces to be bonded has a direct effect on the speed at which the bond will cure. Low moisture and ph increase curing times. Accelerator is formulated to condition the join so that the CA will harden in less than ten seconds. It can be used to cure larger amounts of CA as found in lose joints and sets any excess that may squeeze out of a joint before it can cause problems dripping or sticking unexpected components, like fingers !
Insta-Set™ is a catalyst that accelerates the curing process by enhancing the alkaline levels during the polymerization process. Applied from a spay bottle it is usually applied to harden the CA that flows from a joint, but it can also be applied to one of the surfaces to be bonded, the other carrying the CA will bond immediately the surfaces come into contact with each other.
Insta-Set is enhanced with a strawberry scent and activates CA in six to eight seconds. Unlike some accelerators it doesn’t degrade and reduce the strength of the CA and it is compatible with all surfaces including white foam and clear plastic.
USAGE
After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.
GENERAL SAFETY INFORMATIONS ABOUT CA :
While holding the bottle upright, loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off end of tip. Hold parts lightly together and apply glue on seam for instant bonding. Full strength is reached in 1 hour.
-
STORE AWAY FROM CA ADHESIVES
-
WARNING
- COMBUSTIBLE LIQUID:
- Contains
- Synthetic Hydrocarbons and Aromatic Amine.
- Use with adequate ventilation. Avoid prolonged breathing of vapors. Do not induce vomiting if ingested. In case of eye or skin contact, flush with water.
- KEEP OUT OF REACH OF CHILDREN
- Manufacturer : BSI
What's so great about Cyano adhesives?
