NC1600 NiMH AA/AAA battery charger

• Four independent slots allow charging four cells simultaneously.
• Easy operation with four buttons.
• Intuitive interface with independent display for each slot.
• Working with both 15W QC3.0, PD 5V/3.0A, or 5V/2.1A adaptor.
• Battery parameters and real-time datas are all at a glance w/ LCD screen.
• Auto-measure internal resistance once the battery is inserted.
• Three working modes of CHARGE, DISCHARGE & REFRESH.
• Auto-start if no operation within eight seconds after the battery is inserted.
• Adjust current automatically based on the battery internal resistance detected.
• Trickle current ensure the battery is truely fully charged.
• Multiple protections: Over-temperature Protection, Reverse Polarity Protection, Over-current Protection, Capacity Protection, Over-voltage Protection, and Short-circuit Protection

• Input Power: 15W QC3.0, PD 5V/3.0A or 5V/2.1A
• Battery Type: NiMH/NiCD
• Battery Size: AA/AAA
• Charge Rate:
  • When powered by 15W QC3.0, PD 5V/3.0A adaptor: 1600mA/slot for 3 batteries; 1500mA/slot for 4 batteries.
  • When powered by 5V/2.1A adaptor: 1600mA/slot for 2 batteries; 1000mA/slot for 4 batteries.
• Discharge Rate: 100-700mA
• Trickle Charge Rate: 30-70mA
• Working Modes: Charge, Discharge and Refresh mode
• - V: 7mV
• Discharge Cut-off Voltage: 0.9V
• Capacity Protection: 3000mAh
• Working Temperature: 0-40℃
• Working Humidity: 10-90%RH
• Storage Temperature: -10-70℃
• Storage Humidty: 20-70%RH
• Net Weight: 114g
• Size: 108x79x32.9mm

• 1 x NC1600 Charger
• 1 x User manual

Note : Batteries are not includes