DISC.. FPV 220 Crossking Competition racer PNP kit

Model: BEEKFPV220CO-PNP

Manufacturer: Beez2B

This is the FPV220 Crossking Competition Racer from Beez2b, perfect for FPV racing expert pilots, searching a LiPo 4S powered quadracer. Factory assembled, you just need your radio system and a LiPo battery to enter the race.

Meer details

Beschikbaarheid: Niet meer gedrukt

Vind uw dichtstbijzijnde Beez2b dealer.

Meer informatie

The new Beez2b quadracers FPV 220 Crossking are available as BNF kit (You just add your transmitter), as PNP Kit (You add your transmitter, your receiver and your battery pack) and as Frame Kit (You can choose all the motor/electronics equipments). They are also available in two versions : The Sport Racer is perfect for FPV racing beginnersn with a glass fiber and plastic frame and a LiPo 3S powered motor system. The Competition Racer is for experimented FPV racing pilots, with a carbon fiber and plastic frame, and a very powerful LiPo 4S powered motor system.

The Competition Racer PNP kit features a carbon fiber and plastic frame, factory assembled, and with 2205-Kv2300 brushless motors, the 4 Rotor Sense & OneShot125 20A ESCs (3-4S), the 3 in 1 electronic board (flight controller, power distribution circuit and LED controller), a 640x480 PFV camera and a 25 mW 5.8 GHz video transmitter intalled. You just have to add your favorite transmitter and receiver (with PPM, S-Bus or Spektrum satellite output) and your battery, and you can enter the race.

Specifications

Diagonal distance between motor axles : 230 mm
Total length without props (Frame) : 193 mm
Total length with props (overall) : 284 mm
Total width without props (Frame) : 210 mm
Total width with props (overall) : 298 mm
Total height without/with Vtx antenna : 39/119 mm
Flying weight (With 4S 1800 mAh lipo battery) : 584 g

Motor system

Motors : 2205-Kv2300
ESC : 4 x brushless 20A ESCs with Rotor SENSE et OneShot125
Suggested Battery : 4S 14.8V 1800 mAh LiPo battery (not included)
Props : 3-Blade 5"
Flight controller : "F3" 3 in 1 electronic board (Flight controller, LED controller, Power distribution)
Charger : SkyRC e4

FPV equipment

640 x 480 FPV Camera, operating voltage 3.6-5V, working current 100 mA, Lens 2.5 mm, weight 3.2 grams.
40 channels 5.8 GHz vTx

Composition Kit

Pre-assembled FPV-220 Crossking Competition Racer (Carbon and plastic main frame) with :
- 2 x CW 2205-Kv3200 motors
- 2 x CCW 2205-Kv3200 motors
- 4 x 20A ESCs with Rotor Sense and OneShot125 for 3-4S LiPo
- 1 x 3 in 1 electronic boad (Flight controller, LED controller, Power Distribution Circuit)
- 1 x 40 channels 5.8 GHz vidéo transmitter
- 1 x 640 x 480 FPV camera
3-Blade 5" prop set (2 CW & 2 CCW)
Video transmitter antenna
Double sided adhesive foam
USB cable
Carry case